Dr. Fixit Pidicrete CF 21

High range water reducing admixture for concrete
Pack Size: 30 & 225 litre

Application Areas
High performance concrete for columns, beams & dams
General purpose ready mix concrete, prestressed & precast concrete
Complex & heavily reinforced concrete railway sleepers
High strength & low permeable concrete
Mass concrete

Features & Benefits
Reduces water up to 25% without effecting the work ability
Increases work ability at a given water to cement ratio, easy compaction, eliminates honey-combing
Provides highly cohesive concrete mix & reduces the chance of bleeding & segregation
Makes concrete less permeable and hence more durable
No chloride- suitable for RCC
Compatible with all types of Portland cement/including slag/SRC
Helps in reducing cement content for a required strength
High early and ultimate compressive strength concrete

Coverage
250 ml to 750 ml per 50 kg bag cement (depending upon site requirement)

Dr. Fixit Pidicrete CF 51

Water reducing & accelerating admixture for concrete Pack Size: 30 & 225 litre

Application Areas
Low temperature concrete
Concrete block and mortar
Precast and reinforced concrete
Concrete pipes, brick laying mortar mixes
Tremie concrete for moderate pours

Features & Benefits
Reduces setting time depending on the dose and ambient temperature
Reduces water upto 15%
Improves workability at a given w/c ratio
Provides highly cohesive concrete mix without any bleeding and segregation
Helps to achieve high early strength, hence reduces time required for deshuttering Helps in reducing cement content for a required strength
Reduces construction cost – no delay due to cold weather, use of OPC instead of rapid hardening cement

Coverage
250 ml to 750 ml per 50 kg bag cement

Dr. Fixit Deshuttering Oil

Water dilutable shutter release agent
Pack Size: 1 litre

Application Areas
On all type of mould or formwork like wood & steel etc.

Features & Benefits
Water-dilutable, eco friendly, very easy to apply
Economical in use
Suitable for all types of concrete moulds and form works
Extends life of the plywood and steel surfaces of shuttering material
Significantly improves surface finish of concrete after shutter removal

Coverage
After dilution with clean water in 1:5 ratio (6 litres mixed solution)
. On pre-oiled wooden shuttering - 90 to 120 m2
. On untreated wooden shuttering - 75 to 85 m2
. On steel shuttering - 100 to 150 m2