Dr. Fixit Raincoat

High performance acrylic elastomeric, exterior waterproof coating
Pack Size: 1, 4, & 20 litre

Application Areas
For external rain lashed walls as a heavy duty waterproof coating

Features & Benefits
Heavy duty, waterproof coat for external walls
No water dilution at site
2 time thicker than normal exterior paint.
Higher binding property & more durability
Bridges cracks up to 0.5 mm width
UV and stain resistant
Anti-algae & anti-fungal
Low dirt pickup
Can be tinted as normal paint on machine

Coverage
35 sq.ft/ltr for 2 coats on normal cement / sand surface (Coverage may vary, depending upon porosity & texture of substrate)

Dr. Fixit Heatshield

Heat resisting / reducing exterior coating
Pack Size: 1, 4 & 20 litre

Application Areas
External and internal masonry & plaster walls
Roofs & walls of residential and commercial buildings (new & old)
Suitable for any surface e.g. concrete, metal, timber, asbestos etc.,
Cold storage units from outside
Fuel and water tanks

Features & Benefits
Excellent heat & UV resistant properties
Energy saving, cuts electricity bills on air -conditioners
Single component, easy to apply, Non-toxic/ resistance to algae and fungus
Waterproofing properties

Coverage
30 sq.ft/ltr per coat (Coverage may vary, depending upon porosity & texture of substrate)

Dr. Fixit Primeseal

Efflorescence resistant penetrating primer for Rain coat, Newcoat & Heatshield
Pack Size: 1, 10 & 20 litre

Application Areas
Used as a sealer & binding coat prior to Raincoat, Newcoat & Heatshield application

Features & Benefits
Good binding of chalky and porous substrates
Used as a primer on internal & external surfaces
Based on chemically inert polymer hence suitable for higher alkaline substrates
Provides deep penetration that imparts excellent substrate adhesion
Provides excellent efflorescence resistance by blocking capillaries & pores.

Coverage
8-10 m2/ltr/coat (Coverage may vary, depending upon porosity & texture of substrate)

Dr. Fixit Newcoat

Heavy duty, reinforced acrylic coating
Pack Size: 4 & 20 litre

Application Areas
Over existing leaking terrace without dismantling old waterproofing system like brick bat coba, concrete screeds etc.
Flat and sloped roofs with large spans

Features & Benefits
Allows foot traffic.
Bridges cracks up to 2 mm wide.
Re-waterproof existing waterproofing systems like brick bat coba etc without breaking.
Ready to use, easy application.
Available in 3 colors, for controlled application & aesthetics.
Excellent UV resistance.
No protection required.

Coverage
1.5 lit / m2 in 3 coats at 1 mm thickness

Dr. Fixit Roofkote

A general purpose waterproofing bitumen emulsion
Pack Size: 18 kg tin

Application Areas
Waterproofing for roof, wall, gutter, concrete, metal, tile, wood, plastic etc.
As a mastic roof leveling course & waterproof coating
For small spacing in new roofs

Features & Benefits
Roofkote is a viscous dark brown smooth cream water borne bitumen emulsion & is of suitable consistency for application in relative thick films by brush or mop and bond firmly to either dry or damp surfaces.
Roofkote is used for waterproofing when damp and leakage are main problems.
It is applied by brush with reinforcement polyester to provide a weather proof membrane without jointing or overlapping, because the polyester could achieve complete continuity and integrating all over the roof.

Coverage
0.5 Kg/m2/coat

Dr. Fixit Roofseal

Liquid applied Elastomeric waterproofing membrane
Pack Size: 18 kg pail

Application Areas
Exposed and concealed roof for waterproofing application for New Roofs on slabs
Damp proofing
Wet area waterproofing

Features & Benefits
Excellent elastomeric properties , can easily accommodate all normal building movements to retain a water seal
Can be applied to complex shapes to form a jointless and highly durable waterproofing membrane
Easy to apply by brush
Excellent adhesion to the building surfaces including felt, brick, metal etc.
Excellent water vapor transmission
Good chemical resistant (alcohol, salt solution, mild acid & alkali)

Coverage
1 ltr / m2